UPS

APC BV8000I-MSX 800VA /450 Watts Easy Use ups

• Output power capacity: 450 Watts / 800VA
• Max Configurable Power (Watts): 450 Watts / 800kVA
• Nominal Output Voltage: 230V
• Topology: Line Interactive
• Waveform type: Stepped approximation to a sine wave
• Transfer Time: 6ms typical : 10ms maximum Input
• Input frequency: 50/60 Hz +/- 1 Hz Unsynchronised

• Max Configurable Power (Watts): 375 Watts / 650VA
• Output Frequency (sync to mains): 50/60 Hz +/- 1 Hz Unsynchronised
• Topology: Line interactive
• Transfer Time: 6 ms typical: 10 ms maximum
• Input frequency: 50/60 Hz +/- 5 Hz Auto-sensing
• Input voltage range for main operations: 170 – 280V
• Battery type: Lead-acid battery
• Expected Battery Life (years): 3 – 5

• Capacity: 2000VA / 1200W
• Input Voltage Range: 140-300 VAC
• Output Voltage: 220/230/240 VAC
• Battery Type: Sealed Lead Acid Maintenance-Free
• Battery Capacity: 12V 9Ah x 2
• Battery Backup Time: Up to 15-20 minutes at half load
• Recharge Time: 6 hours to 90% capacity after complete discharge

Model:
– Capacity: 1050VA/630W

Input :
– Voltage 220-240VAC
– Voltage Range 140-300 VAC
– Frequency: 50 / 60Hz
– Current :4.8A Max

Output:
– Voltage Regulation (Bat.Mode): +/-10%
– Frequency :50 / 60Hz
– Waveform: Simulated Sine wave

Battery:
– Battery Type: 12V / 9AH x 1
– Charging ability: 6 hours recover to 90% capacity

Transfer Time:
– Typical:2-6ms

Protection : Short circuit, Overload, Battery discharge and overcharge, Surge Protection

• Automatic restart of loads after UPS shutdown – Automatically starts up the connected equipment upon the return of utility power.
• Automatic self-test – Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Automatic Voltage Regulation (AVR) – Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
• Resettable circuit breaker – Easy recovery from overloads; no need to replace a fuse.